- Two-component, water-borne, modified urethane-based adhesive for pressure (vacuum) and heat lamination of bilaminates and expanded vinyls.
- Water-borne, low VOC, neoprene-based contact adhesive for general purpose bonding applications.
- High performance, high solids, water-based, pressure-sensitive adhesive; spray, brush or roll coat.
- White, high solids, water-based, general purpose adhesive for a variety of porous and non-porous substrates; spray or roll coat.
- Fast setting, non-flammable, water-borne, resin emulsion-based adhesive for bonding or laminating paper and corrugated.
- Instant tack, two-part sprayable water-based adhesive.
- Two-component, water-borne neoprene/latex-based adhesive for spray bonding of foam-to-foam, wood or fabrics. Green color.
- Two-component, water-borne neoprene/latex-based adhesive for spray bonding of foam-to-foam, wood or fabrics. Lemon-yellow color.
- Instant grab, two-part, sprayable water-based adhesive. Yellow color.
- Water-borne, dextrine-based labeling adhesive which provides aggressive tack and excellent machinability. Excellent bonds to many substrates. Natural amber color.
- Slightly pressure-sensitive, acrylic-based water-borne labeling adhesive for PET, PP, PVC or untreated PE bottles. Excellent tack and good setting speed.
- Pressure-sensitive, water-borne acrylic emulsion adhesive. Milky white liquid which dries to a clear film.
- Polyisocyanate curing agent typically used with high solids, high reactive adhesives such as Bostik® 7132.
- Curing agent typically used with Bostik neoprene adhesives such as Bostik® 1095M and 1096M to promote maximum shear and tensile bond values, heat and water resistance and film toughness.
- Curing agent typically used with Bostik neoprene adhesives such as Bostik® 1095M and 1096M to promote maximum shear and tensile bond values, heat and water resistance and film toughness.
- Curing agent typically used with Bostik® 7132R to ensure the development of heat and creep resistance to bond.
- Curing agent typically used with Bostik® 1125 to enhance heat and water resistance.
- Special purpose, solvent-free, water dispersible aliphatic isocyanate-based additive recommended for increasing heat, moisture and solvent resistance in waterborne adhesive applications.
- Primer for rigid/semi-rigid surfaces; spray, brush or roll coat.
- Two-part, heat resistant adhesive for industrial protective cothing/equipment; brush or roll coat.
- Heat resistant, fast tacking laminating adhesive; brush or roll coat.
- Solvent-based, neoprene-modified, synthetic resin adhesive with excellent resistance to heat and moisture. High performance, all-purpose bonding of fabrics, wood, laminates, metals and plastics. Not intended for bonding flexible PVC. Beige color.
- Neoprene adhesive, bonds neoprene wetsuits and coated fabrics; brush applied.
- Fast drying contact adhesive for a wide variety of substrates; spray, brush or roll coat. MIL Spec. MMM-A-121.
- One-part, long open-time, neoprene-based contact adhesive for bonding rubber-coated fabrics to themselves, to wood or to many plastics (except flexible PVC).
- Spray grade contact adhesive with long open-time. Neutral color.
- Solvent-based, neoprene rubber adhesive. Provides excellent bonds of cured and uncured neoprene and butyl to concrete, wood or metal. Excellent resistance to cold or boiling water, detergents and aliphatic oils. Brush, roller or trowel applied.
- Two-part synthetic rubber adhesive for bonding hypalon inflatables; brush applied.
- Curative used with 2402AP; 12.5 : 1 mix ratio by weight.
- Solvent-borne, natural rubber-based adhesive designed to provide a receptive surface for subsequent coatings of uncured rubber stocks before and after vulcanization. Used in the construction of rubberized fabrics.
- High performance synthetic rubber, pressure-sensitive for bonding untreated polyethylene; brush applied.
- Fuel resistant industrial adhesive for porous/non-porous substrates; brush applied. MIL Spec. MIL-C-4003.
- Hot-cured, nitrile-based adhesive or base coat for synthetic rubber fabrics. Bonds cured for 30 minutes at 260°F, shows good resistance to oil, gasoline, aromatic fuels, detergents or water. Final heat resistance up to 225°F.
- Fast drying, nitrile-based adhesive for plastic substrates; brush or roll coat. FDA Reg. 12 CFR 175.105.
- Type BMS 5-30F Type I; non-staining, clear drying, nitrile aircraft adhesive; brush applied.
- Type BMS 5-14H; non-staining, clear drying, nitrile aircraft adhesive; brush applied.
- One-component, fast drying, nitrile-based adhesive. Provides excellent adhesion to rigid plastics, ABS, unprimed TPO's, primed polyolefins, PUR foams and carpeting. Will adhere to itself for high green strength coated bonds. Sprayable. Brown color.
- Spray grade nitrile used for flexible vinyl and line bonding.
-
Fuel resistant, industrial nitrile adhesive; brush applied.
- General purpose, high performance electronics adhesive for porous and non-porous substrates; brush or roll coat.
- Part "A" used in conjuction with part 7040B as extremely low viscosity adhesive which can be used either as a primer for bonding Buna-N cements to metal or as an additive to Buna-N cements.
- Part "B" used in conjunction with part 7040A as an extremely low viscosity adhesive which can be used either as a primer for bonding Buna-N cements to metal as an additive to Buna-N cements.
- Urethane adhesive for garment industry; brush applied.
- Vinyl adhesive for vacuum forming PVC; spray or roll coat. Amber color.
- Vinyl adhesive kit with Boscodur 24T for vacuum forming PVC; spray or roll coat. Meets BMS 5-127 Type 2, Class 2 Revision F.
- Vinyl adhesive for vacuum forming PVC; spray or roll coat. Red color.
- Vinyl adhesive for vacuum forming PVC; spray or roll coat. Amber color.
- Vinyl adhesive for vinyl covered fabrics; brush applied.
- 100% solids urethane adhesive for laminating wood, metal or fabric; brush or roll coat.
- High performance, warm-applied, one-part urethane HM-PUR adhesive used for bonding aluminum, steel, wood, fabrics and many plastics. Clear color with UV "tracer" added to aid inspections of bonded assemblies, especially in textile applications.
|
